NetApp Certified Implementation Engineer - SAN, ONTAP v1.0

Page:    1 / 8   
Exam contains 111 questions

An administrator has a NetApp AFF cluster with two SVMs serving LUNs. SnapMirror active sync is configured, and a disaster recovery test is planned over the weekend.
Which NetApp ONTAP command will show the status of this test?

  • A. storage failover hwassist show
  • B. network interface failover-groups show
  • C. snapmirror failover show
  • D. snapmirror config-replication status show


Answer : C

A NetApp FC SVM and six clients have been attached to a redundant pair of Cisco Fabric Switches. Each NetApp controller and client has one connection to each switch.
What are two ways to verify that all client paths are connecting to the NetApp FC SVM? (Choose two.)

  • A. On the switch: show flogi database
  • B. On the switch: show zoneset active
  • C. On the NetApp Cluster: vserver fcp portname show
  • D. On the NetApp Cluster: vserver fcp initiator show


Answer : AD

A customer uses several node types in their SAN environment. They want to migrate iSCSI LIFs without disruption.
Which command can achieve this?

  • A. Run ucadmin modify on a NetApp All SAN Array (ASA) system.
  • B. Run network interface migrate on a NetApp FAS system.
  • C. Run network interface migrate on a NetApp AFF system.
  • D. Run network interface migrate on a NetApp All SAN Array (ASA) system.


Answer : D

An engineer has a 100GB volume with the space guarantee set to volume and fractional reserve set to 100. The snapshot reserve is disabled. The volume contains two 20GB LUNs, and each LUN has the space guarantee enabled and is 50% full. The engineer creates a snapshot of the volume, and no data is written or modified after the snapshot is taken.
What is the available space in the volume?

  • A. 60GB
  • B. 40 GB
  • C. 20GB
  • D. 80GB


Answer : C

What needs to be done to create a consistent Snapshot copy of a LUN without disruptions?

  • A. Quiesce I/O to the LUN.
  • B. Map the LUN to a host.
  • C. Ensure that the LUN is unmapped from the host.
  • D. Ensure that the LUN is the only one in the volume.


Answer : A

Which two NetApp features provide synchronous data replication between two sites for SAN workloads with automatic failover in case of a site disaster? (Choose two.)

  • A. SnapMirror Synchronous
  • B. SnapMirror active sync
  • C. SnapMirror SVM
  • D. MetroCluster IP


Answer : BD

What does an Active/Optimized path mean in a FAS configuration?

  • A. Paths are serviced by the node where the LUN is located.
  • B. Paths are configured for automatic LIF failover.
  • C. Paths are configured for round robin.
  • D. Paths are serviced by the HA partner node.


Answer : A

A healthcare customer wants to implement an FC SAN solution consisting of a NetApp ONTAP system, Broadcom switches, and servers.
Which tool contains detailed blueprints and implementation references that can be used to design this solution?

  • A. NetApp Active IQ Unified Manager
  • B. NetApp Verified Architecture
  • C. NetApp Fusion
  • D. NetApp Active IQ Config Advisor


Answer : B

What are two possible options for iSCSI authentication methods? (Choose two.)

  • A. CHAP
  • B. certificates
  • C. deny
  • D. SAML


Answer : AB

A customer wants to use NVMe/FC to connect three Linux hosts to their NetApp ONTAP cluster.
What is the minimum speed for an HBA in an ONTAP controller in this scenario?

  • A. 32Gbps
  • B. 8Gbps
  • C. 4Gbps
  • D. 16Gbps


Answer : A

A customer is deploying a new 8-node NetApp ONTAP cluster for their SAN workloads using FCP, NVMe/FC, and NVMe/TCP.
In this scenario, which statement is true?

  • A. NVMe/TCP supports a maximum of two LIFs per node.
  • B. NVMe/FC and FCP require different FC ports.
  • C. NVMe/FC and NVMe/TCP must be configured in separate SVMs.
  • D. NVMe/TCP can only run at 32Gbps or faster.


Answer : A

An administrator has a 2-node NetApp ONTAP cluster that is hosting FC LUNs for 90 SAN hosts. The hosts are experiencing occasional performance problems and receiving QFULL responses from the cluster nodes.
Which action would resolve this issue?

  • A. Increase the queue depth on the target ports.
  • B. Increase the queue depth on the initiator ports.
  • C. Configure additional FC ports on the hosts.
  • D. Configure additional FC target ports.


Answer : D

A customer wants to confirm the compatibility of their server operating system and driver versions before installing a new NetApp ONTAP SAN solution.
Which NetApp tool can be used?

  • A. Active IQ Upgrade Advisor
  • B. Interoperability Matrix Tool (IMT)
  • C. Hardware Universe
  • D. Active IQ Config Advisor


Answer : B

Which NetApp ONTAP storage efficiency method provides storage savings by placing multiple different 1KB files in the same block?

  • A. compaction
  • B. thin provisioning
  • C. deduplication
  • D. compression


Answer : A

An administrator connects to a LUN from Node A to a host in a redundant pathing configuration.
How does the administrator show that the LUN delivers data if a node disruption occurs?

  • A. Pull all the cables from the cluster interconnect.
  • B. Power off a PDU in the rack.
  • C. Perform a takeover and giveback on both nodes.
  • D. Shut down a backend switch.


Answer : C

Page:    1 / 8   
Exam contains 111 questions

Talk to us!


Have any questions or issues ? Please dont hesitate to contact us

Certlibrary.com is owned by MBS Tech Limited: Room 1905 Nam Wo Hong Building, 148 Wing Lok Street, Sheung Wan, Hong Kong. Company registration number: 2310926
Certlibrary doesn't offer Real Microsoft Exam Questions. Certlibrary Materials do not contain actual questions and answers from Cisco's Certification Exams.
CFA Institute does not endorse, promote or warrant the accuracy or quality of Certlibrary. CFA® and Chartered Financial Analyst® are registered trademarks owned by CFA Institute.
Terms & Conditions | Privacy Policy | Amazon Exams | Cisco Exams | CompTIA Exams | Databricks Exams | Fortinet Exams | Google Exams | Microsoft Exams | VMware Exams