Microsoft Dynamics 365 Supply Chain Management, Manufacturing v1.0

Page:    1 / 10   
Exam contains 141 questions

HOTSPOT -
A company makes engine parts used in the automotive industry.
They are in the process of retooling an existing manufacturing plant. They are looking to use Dynamics 365 Supply Chain Management to help support the Bill of
Materials (BOM) product lifecycle for engineering version control.
You must translate existing production processes into the proper elements. You need to create BOM lifecycle states to translate existing production processes into the proper elements.
What type of BOM product lifecycle state should you create? To answer, select the appropriate BOM state in the answer area.
Hot Area:




Answer :

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/bill-of-material-bom

HOTSPOT -
A company implements Dynamics 365 Finance and Operations.
You need to ensure that cost roll-ups and sales price calculations are configured for the scenario.
Which options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:




Answer :

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/bom-calculations

DRAG DROP -
You are the product definition manager for a car manufacturing company. You set up and maintain the production configuration models used at the company.
You must build a new configuration model and include constraints in the model.
You need to determine which constraint type to use for each scenario.
Which constraint type should you use? To answer, drag the appropriate constraint types to the correct scenarios. Each constraint type may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:




Answer :

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/build-product-configuration-model

You are the production supervisor in charge of setting effective cost prices for the labor force in a manufacturing company.
It is the end of the year and the labor rates have been recalculated based on new salary data.
You need to update the effective labor costs for all labor groups.
Which element must be updated?

  • A. cost groups
  • B. shared category
  • C. resource group
  • D. cost category
  • E. production orders


Answer : D

DRAG DROP -
A company produces custom-made bicycles that offer many different configurations.
Your standard bicycle, B-0001, is made with many common components such as a frame and wheels. Customers can choose between two frames: F-0001 or F-
0009. Wheel W-0001 is only compatible with frame F-0001.
You create the following configuration groups: Frames, Wheels.
You need to ensure that users can only select valid combinations of frames and wheels.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:




Answer :

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration

A company produces pipe at certain fixed lengths.
The company must be able to schedule cutting machines. You set up the cutting machines as resources. All cutting resources can produce many of the products.
There are some products that require cutting machines that can produce longer lengths of product. Only some of the machines can do this.
You need to configure the resources to account for these different products.
What should you do?

  • A. Configure the Data/Hour option on the Capacity unit field on the resource.
  • B. Build capability related to length and assign to the appropriate resources.
  • C. Create a resource group for each length.
  • D. Create a resource for each length.


Answer : B

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/tasks/define-resource-capabilities

DRAG DROP -
A company uses separate finished good item numbers for size variations of the same product.
The company wants to minimize the number of variously-sized items that are created.
You need to perform the setup to allow variants in size to the product master.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:




Answer :

Reference:
https://gfeaxblog.wordpress.com/2017/09/28/o365-how-to-create-product-masters/

A company manufactures and sells speaker boxes. The speaker boxes can be silver or black with a basic or upgraded wiring harness assembly.
The speaker box must be created in the item master so the variables for colors and harness type can be assigned at order entry.
You need to create a new item that supports multiple variables.
What should you do?

  • A. Create a new product. Select predefined variant as the configuration technology
  • B. Create a new product. Select constraint-based configuration as the configuration technology
  • C. Create a new product master. Select predefined variant as the configuration technology
  • D. Create a new product master. Select constraint-based configuration as the configuration technology


Answer : C

HOTSPOT -
An inventory control clerk manages adjustments in inventory.
Some adjustments have a cost impact. Other adjustments must be posted to a specific ledger account or must be registered in inventory.
You need to configure the system.
Which journal types should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:




Answer :

Reference:
https://community.dynamics.com/ax/b/abhijeethelestheaxeffect/posts/movement-journal-in-ax-2012-r3

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company uses Dynamics 365 Supply Chain Management to manage production configuration.
A product designer creates a remote control toy that can be purchased with different tire sizes.
Sales representatives need to perform product configuration for the custom tire variants when they create a new order.
Solution: Select the custom tire size when filling out the item requirement line.
Does the solution meet the goal?

  • A. Yes
  • B. No


Answer : B

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company uses Dynamics 365 Supply Chain Management to manage production configuration.
A product designer creates a remote control toy that can be purchased with different tire sizes.
Sales representatives need to perform product configuration for the custom tire variants when they create a new order.
Solution: Select the custom tire size when filling out each sales order line.
Does the solution meet the goal?

  • A. Yes
  • B. No


Answer : A

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company uses Dynamics 365 Supply Chain Management to manage production configuration.
A product designer creates a remote control toy that can be purchased with different tire sizes.
Sales representatives need to perform product configuration for the custom tire variants when they create a new order.
Solution: Select the custom tire size when filling out each sales quotation line.
Does the solution meet the goal?

  • A. Yes
  • B. No


Answer : B

HOTSPOT -
A manufacturing company uses license plates for inventory tracking of all materials. Part M9202 is stored with 30 units for each license plate. You create a production order that includes one unit of part M9202 and release the order for picking. There is no inventory currently available in the production input location.
The warehouse fast-tab setup for part M9202 is shown below.


Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:



Answer :

Reference:
https://docs.microsoft.com/en-us/archive/blogs/axmfg/order-picking-from-license-plate-locations https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/set-up-a-unit-sequence-group-and-unit-of-measure-conversions-in-warehouse-management

A company wants to account for the time to set up a machine to manufacture a new part.
You need to set up the costing calculations in the system.
Which three calculation group warnings can you set up? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

  • A. No consumption
  • B. No cost price
  • C. No BOM
  • D. No resources
  • E. No route


Answer : BCE

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/bom-calculation-groups

A company implements manufacturing in Dynamics 365 Supply Chain Management.
The company wants to efficiently produce products comprised of different order types.
You need to select the appropriate production plan.
Which production process should you use for the production run?

  • A. discrete
  • B. process
  • C. lean
  • D. mixed mode


Answer : D

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/production-process-overview

Page:    1 / 10   
Exam contains 141 questions

Talk to us!


Have any questions or issues ? Please dont hesitate to contact us

Certlibrary doesn't offer Real Microsoft Exam Questions.
Certlibrary Materials do not contain actual questions and answers from Cisco's Certification Exams.
CFA Institute does not endorse, promote or warrant the accuracy or quality of Certlibrary. CFA® and Chartered Financial Analyst® are registered trademarks owned by CFA Institute.