Advanced HPE Edge-to-Cloud Solutions v1.0
Question 1
Refer to exhibit 504029 from a customer's Aruba CX6200 switch:
Which statement is true in this scenario?
- A. An EVPN VXLAN setup will dynamically establish the VTEPS between peer switches
- B. A static VXLAN setup needs to be created between the peer witches
- C. A Foundation license needs to be applied to the switches to scale the VXLAN configuration
- D. A VNI setup requires a same model of the CX switch on each location
Answer : B
Question 2
Your customer requires a data protection solution that will support their workloads running on an HPE Alletra MP B10000 storage array.
Your customer requirements include:
- Protecting VMware vSphere workloads
- Conversion between hypervisors
- Pay-per-use model
- Near synchronous and block-level replication
Select the most appropriate solution.
- A. HPE Alletra Storage Server 4120
- B. HPE StoreOnce 3660
- C. HPE Data Ops Manager
- D. HPE Zerto
Answer : D
Question 3
Your customer has requested a solution with HPE Alletra Storage MP B10000 that needs to have eight 32GB FC ports per node for direct host connectivity.
A junior architect has prepared a BOM for the solution.
Refer to BOM:
What needs to be changed in the BOM to meet the requirement?
- A. Add two S3N85A XCVRs to the BOM
- B. Add two S2S64A HBAs to the BOM
- C. Replace the R7C82A HBAs with S2S64A HBAs in the BOM
- D. Remove the S3N85A XCVRs and add DAC cables to the BOM
Answer : C
Question 4
Your customer is expecting to see an increase in the amount of data stored on their HPE Alletra Storage MP B10120.
You are asked to create a plan to support a raw capacity of 620 TB on the unit.
Refer to exhibit:
What change would you recommend to the configuration to achieve this?
- A. Replace the nodes with B10130 model and add additional drive shelf
- B. Add 100Gb HBA's to B10120 nodes and additional drive shelf
- C. Add more QLC drives to the system and change the sparing to minimal
- D. Replace the QLC drives with higher capacity TLC drives
Answer : C
Question 5
Your customer is looking for a hardware platform to deploy a SAP HANA workload. They are considering HPE Superdome Flex, HPE Synergy and HPE ProLiant systems.
Which statement about these hardware platforms is true for a SAP HANA solution?
- A. HPE Superdome Flex can scale-up to 32 sockets and 48 TB of memory for SAP HANA and provides full support for HPE Persistent memory.
- B. HPE Superdome Flex provides higher scalability, while HPE Synergy systems provide better reliability, availability, and serviceability features.
- C. HPE ProLiant DL560 Gen10 is delivered as a SAP HANA appliance, but it is also supported in the TDI model and fully supports HPE Persistent Memory.
- D. HPE Serviceguard for Linux licenses are attached to each HPE Superdome Flex chassis and provides lower cost for a HA solution for SAP HANA.
Answer : C
Question 6
Your customer plans to replace a legacy HPE BladeSystem solution with HPE Synergy platform.
The customer requirements include:
- 30 compute nodes to support their virtualization workload
- Redundancy within the management subsystem
- An in-frame storage solution to support vSAN
- A redundant networking subsystem with the ability to virtualize WWNs
- Simplified management with a single logical enclosure
You are reviewing the following proposal:
- 3 x HPE Synergy 12000 frames
- 2 x HPE Virtual Connect SE 100 Gb F32 Modules for Synergy
- 4 x HPE Synergy 50 Gb Interconnect Link Modules
- 3 x HPE D3940 Storage Module with the maximum number of drives
- 6 x HPE Composed - 30 x HPE OneView Advanced licenses
- 30 x SY 480 Gen11 compute modules, each with two CPUs and all required mezzanine cards
Which statement about this proposal is true to help meet the customer requirements?
- A. Additional HPE OneView Advanced licenses should be added for the HP E Virtual Connect modules and HPE D3940 Storage Modules.
- B. HPE 32Gb Brocade switches should be added to the proposal to enable WWNs virtualization and profile mobility.
- C. 3 x HPE Composer 2 modules can be removed from the proposal, as you need one HPE Composer2 module per HPE Synergy frame for enhanced availability.
- D. 30 x HPE OneView Advanced licenses should be removed from the proposal.
Answer : D
Question 7
Your customer needs to increase the availability of their storage infrastructure built on top of their HPE Alletra MP B10000 storage systems. You need to design Active Peer Persistence for HPE Alletra MP B10000 Remote Copy configuration.
Which of the following statements is true? (Choose two.)
- A. Replication links can be configured over FC.
- B. Replication links must use IP, as peer persistence is required.
- C. Replication policies need to have the host proximity definitions.
- D. Replication links must be connected as point-to-point to the storage arrays.
- E. Replication links can be configured using IP and FC for redundancy.
Answer : AC
Question 8
Your customer is using an HPE SimpliVity 380 Gen11 environment that is only managed with on-prem utilities.
How can this solution be integrated into the HPE GreenLake management platform to benefit from the HPE Private Cloud Business Edition features?
- A. By configuring the OmniStack integration with HPE InfoSight
- B. By redeploying the cluster as a PCBE setup integrated with DSCC
- C. By registering the iLO using the HPE Compute Ops Management activation process
- D. By deploying the Data Service Connector VM and importing the cluster to DSCC
Answer : D
Question 9
Your customer has provided the CLI output of a switch to show how their devices are connected.
Refer to the output:
What should you consider while designing upgrades to your customer's environment and network components?
- A. The support for Virtual System Extensions is required
- B. The support for VRF tables is mandatory
- C. The support for BGP routing is mandatory
- D. The support for Overlay networks is required
Answer : D
Question 10
Your customer is planning a Scality Ring solution. Approximately 750 TB of data must be stored on the SDS. The customer prefers SSD or NVMe drives.
What is true regarding this solution?
- A. Scality licenses cannot be purchased from HPE.
- B. Scality RING Single Site Hardware Lifetime licenses are provided at a lower cost compared to perpetual licenses.
- C. HPE server hardware, such as Alletra Storage Server 4120 can be used for Scality RING deployments.
- D. The minimum capacity for ordering Scality RING perpetual licenses is 1000TB.
Answer : C
Question 11
A customer is about to do a server refresh with the intent of using HPE ProLiant DL360 Gen11 servers, with CPUs exceeding 270 watt power usage. The customer has existing 19", 42U, air cooled racks they are planning to reuse.
Which cooling option will allow your customer to use the servers with their existing racks, with the least amount of changes to the setup?
- A. Use of liquid-cooled racks
- B. Use of high performance fans
- C. Use of direct liquid cooling
- D. Use of closed-loop liquid cooling
Answer : D
Question 12
One of your customers is planning to refresh their current campus' wired and wireless networking equipment. They are currently moving to a pay-per-use model for their whole IT solution.
They are wondering if there is a possibility to get new networking equipment in this model without capital expenses. They are also interested in moving LAN management to an external service provider. You are presenting HPE GreenLake for Aruba Networking.
What is true regarding this scenario?
- A. Your customer can select a service level for onboarding, operating and updating Aruba networking.
- B. HPE GreenLake for Aruba Networking only offers a cloud management platform for customer-owned equipment.
- C. HPE GreenLake for Aruba Networking offers hardware installation services of customer-owned equipment.
- D. HPE GreenLake for Aruba Networking is the central monitoring cloud software for Aruba equipment only.
Answer : A
Question 13
Your customer would like to increase the availability of their storage infrastructure, built on top of their HPE Alletra Storage MP B10000 storage systems. They would like you to design Active Peer Persistence for HPE Alletra Storage MP B10000 Remote Copy configuration.
Which statement is true?
- A. Quorum Witness is not mandatory for peer persistence.
- B. Both FC and IP links must be configured for replication, as peer persistence is required.
- C. Replication must use FC, as peer persistence is required.
- D. Replication can be configured over IP.
Answer : D
Question 14
Your customer is planning to use HPE VM Essentials as an alternative hypervisor, using HPE ProLiant DL380 Gen11 servers and HPE Alletra Storage MP B10000 over iSCSI.
What consideration must be made for cluster creation?
- A. The need for RDMA support between the NICs used for cluster traffic
- B. The requirement of cluster heartbeat connectivity between the nodes directly
- C. The deployment of quorum witness outside of the VME cluster compute nodes
- D. The amount of compute nodes to form a quorum in the cluster with iSCSI
Answer : D
Question 15
Your customer plans to deploy multiple virtual machines running database workloads. They plan to re-use and extend an existing Synergy, 3PAR, and VMware infrastructure.
What is true regarding a possible upgrade?
- A. HPE OneView for VMware vCenter can be used to deploy additional ESX hosts.
- B. HPE OneView for vRealize Orchestrator can be used to deploy the operating system to new ESX hosts.
- C. HPE 3PAR cannot be used with VMware infrastructure running on Synergy.
- D. HPE OneView can be used for rapid VM deployment.
Answer : A