Using HPE OneView v1.0

Page:    1 / 4   
Exam contains 52 questions

Within HPE OneView you can configure SNMPv1 read community string.
What is the purpose of this feature?

  • A. This is an SNMP community string that will be used when traps are forwarded to a WBEM Provider
  • B. This is an SNMP community string that will be used when traps are forwarded to other SNMP applications
  • C. This is an SNMP community string that will be used to receive a trapג€™s SNMP Agent
  • D. This is an SNMP community string that will be used to receive traps from HPE Onboard Administrators


Answer : C

Reference:
https://www.dnsstuff.com/snmp-community-string

What is the best practice when deploying an HPE OneView appliance?

  • A. deploy the appliance in a hypervisor cluster that is not managed by OneView
  • B. use thin-provisioning for the HPE OneView appliance to save storage capacity
  • C. enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor
  • D. deploy two HPE OneView appliances and configure then in HA mode


Answer : A

Reference:
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03943722

How will setting the Purpose field within the network definition of a server profile impact the network traffic?

  • A. network purpose can give higher priority for a specific type of traffic
  • B. network purpose will impact the traffic only if Virtual Connect modules are used
  • C. network purpose will define QoS within Logical Interconnect
  • D. network purpose does not affect the behavior of the network


Answer : C

You are creating a Logical Interconnect Group for a three-frame HPE Synergy solution with HPE Virtual Connect SE100Gb F32 Modules for Synergy.
In which scenario should you set redundancy for master modules to be highly available?

  • A. When storm control or loop protection will be enabled for Virtual Connect modules
  • B. When each of the frames has two Virtual Connect modules installed
  • C. When each Virtual Connect module is installed in different frame
  • D. When each Virtual Connect module is installed in different fabric


Answer : A

Your customer wants to manage their HPE Superdome Flex using HPE OneView.
Which component must be added to HPE OneView to accomplish this task?

  • A. Baseboard Management Controller (BMC)
  • B. Rack Management Controller (RMC)
  • C. all nPARs created within the complex
  • D. only the base chassis from the complex


Answer : A

Reference:
http://itdoc.hitachi.co.jp/manuals/rv3000/hard/SDF/Server/SDF280/P06150-401a.pdf

Which statement about an HPE OneView server profile is true?

  • A. A server profile can be used to update firmware and drivers when the operating system on the server is up and running
  • B. A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type
  • C. A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage
  • D. A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.


Answer : C

Where is the association between an HPE OneView network and uplink port defined?

  • A. Within an Enclosure Group definition
  • B. Within an HPE OneView network definition
  • C. At the network set level
  • D. At the Logical Interconnect Group level


Answer : D

Reference:
https://techlibrary.hpe.com/docs/synergy/Synergy_D3940/setup_install/238847.htm

Which statement about server hardware types is true?

  • A. Once selected in the server profile, the server hardware type cannot be changed, and a server profile can be moved only between the same type of servers
  • B. Server hardware type can be defined only for HPE Synergy and HPE BladeSystem, but it cannot be defined for HPE ProLiant or Apollo systems
  • C. Administrator has to manually define the server hardware type for any unique server architecture and mezzanine card combination
  • D. The server hardware type is automatically created when a server with unique architecture and mezzanine card configuration is added to HPE OneView


Answer : A

Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen10 systems.
What should you explain to this customer?

  • A. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance
  • B. HPE Management Agent must be installed for HPE ProLiant Gen10 servers
  • C. Not all of the features will be available for HPE ProLiant G7 systems
  • D. HPE ProLiant Gen10 servers do not need an HPE OneView license


Answer : D

Reference:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00036908en_us

Which action is allowed on storage pools managed by HPE OneView?

  • A. Volume provisioning
  • B. Setting storage pool replication
  • C. Changing storage pool RAID level
  • D. Changing storage pool capacity


Answer : D

Reference:
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03934110

Which operation can be performed using HPE OneView for VMware vCenter Server?

  • A. Remove a new node from an existing cluster.
  • B. Configure VMware cluster properties for HA and ORS.
  • C. Create a new distributed switch for cluster connectivity.
  • D. Create a new VMware cluster within vCenter Server.


Answer : D

You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support.
Which interconnects are able to support this connection? (Choose two.)

  • A. HPE VirtualConnect FlexFabric 10Gb/24-Port Module
  • B. HPE Synergy Virtual Connect SE 32Gb FC Module
  • C. HPE Virtual Connect SE 40Gb F8 Module
  • D. HPE Virtual Connect FlexFabric-20/40 F8 Module
  • E. HPE Virtual Connect SE 100 Gb F32 Module


Answer : CE

Reference:
https://support.hpe.com/hpesc/public/docDisplay?docId=a00118216en_us&docLocale=en_US&page=s_network-roce.html

Refer to the exhibit.


Which statement about the presented storage pools is true?

  • A. All storage pools in managed state have a valid HPE OneView license applied.
  • B. All storage pools from the system named ThreePAR-1 can be used for volume provisioning.
  • C. Storage pools in discovered state can be removed from HPE OneView.
  • D. HPE OneView can be used to configure replication only between managed storage pools.


Answer : A

Which statement about logical JBODs configured using HPE OneView and D3940 Storage Modules is true?

  • A. A logical JBOD cannot be created during server profile creation and must be prepared in advance.
  • B. A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.
  • C. Different types of the drives can be used within & logical JBOD as long as they have the same capacity.
  • D. Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator.


Answer : C

Your customer plans to monitor HPE ProLiant DL systems and HPE BladeSystem using HPE OneView.
Which license is required to accomplish this task?

  • A. HPE Composer 2 license
  • B. HPE OneView Advanced license
  • C. HPE OneView Global Dashboard license
  • D. HPE OneView Standard license


Answer : D

Page:    1 / 4   
Exam contains 52 questions

Talk to us!


Have any questions or issues ? Please dont hesitate to contact us

Certlibrary.com is owned by MBS Tech Limited: Room 1905 Nam Wo Hong Building, 148 Wing Lok Street, Sheung Wan, Hong Kong. Company registration number: 2310926
Certlibrary doesn't offer Real Microsoft Exam Questions. Certlibrary Materials do not contain actual questions and answers from Cisco's Certification Exams.
CFA Institute does not endorse, promote or warrant the accuracy or quality of Certlibrary. CFA® and Chartered Financial Analyst® are registered trademarks owned by CFA Institute.
Terms & Conditions | Privacy Policy