HPE Storage Architect v1.0

Page:    1 / 4   
Exam contains 60 questions
Expand All

What is the maximum number of front-end 100 GbE connections supported to front-end network switches from an HPE Alletra Storage MP B10000 controller node without any 25 GbE connection requirements?

  • A. 2
  • B. 4
  • C. 8
  • D. 12


Answer : B

Which statement is correct regarding HPE StoreOnce hardware solutions and the optional networking cards?

  • A. 100 GB PCIe cards are supported on the HPE StoreOnce 5660 platform.
  • B. 64 GB FC HBA cards are supported on the PE StoreOnce 5660 platform.
  • C. Optional FC and Ethernet cards must be licensed.
  • D. Only two PCIe slots are available for additional networking cards.


Answer : C

Which statement is correct regarding the architecture of the HPE Alletra Storage MP B10000 solution?

  • A. Volumes are accessed through more than one controller.
  • B. A write operation is mirrored to the second controller write cache.
  • C. The architecture eliminates the need for write cache mirroring and write cache battery backup.
  • D. Data is compressed and deduplicated when destaged to the back end, not as a separate process.


Answer : C

Which statement is correct regarding a multi-chassis non-switched HPE Alletra Storage MP solution?

  • A. Systems with up to five chassis will autoconfigure the HA (high availability) cage and RAID 6 10+2.
  • B. When upgrading drives, a minimum of eight drives must be added for each upgrade.
  • C. Systems with three chassis will need manual configuration of HA (high availability) cage and RAID 6 10+2.
  • D. No more than two members of the same RAID set can be in the same drive enclosure.


Answer : D

Which HPE Zerto feature allows for the dynamic calculation of trigger thresholds, massively enhancing accuracy and reducing false positives when detecting ransomware?

  • A. Data-Adaptive Detection
  • B. Near-Synchronous Replication
  • C. Continuous Data Protection (CDP)
  • D. Journaling


Answer : A

An HPE Partner is creating an HPE Morpheus VM Essentials solution for a customer. The solution has:
20 HPE ProLiant DL380 servers with dual processors
10 HPE ProLiant 325 servers with single processors
2 HPE Alletra 5000 storage arrays, each with two controllers
The customer does not expect to exceed 500 VMs in this solution.
Based on this information, how many subscription licenses should the HPE Partner plan for?

  • A. 30
  • B. 32
  • C. 40
  • D. 50


Answer : D

Which statement is correct regarding the HPE StoreMore Guarantee?

  • A. The guarantee duration matches the initial support contract and can be renewed upon support contract renewal.
  • B. HPE guarantees a specific capacity, rather than a reduction ratio, ensuring customers receive the promised storage efficiency.
  • C. HPE pays if the system achieves what the contract states, but the customer has more non-reducible data than in the contract.
  • D. HPE and the Partner pay the difference between the default sizing and the final result if they sized beyond what the sizer recommends.


Answer : B

The customer has decided to purchase multiple HPE Alletra 4000 systems to store data from many HPC modeling and simulation workloads that require file and object storage. Some of the workloads have data in different cloud providers as well.
Which software-defined storage (SDS) solution should an HPE partner recommend to complement this solution?

  • A. Qumulo
  • B. Scality
  • C. HPE Ezmeral Data Fabric
  • D. Veeam


Answer : C

Which Veeam option enables verification of the recoverability of every backup, every VM, and every restore point, using a regular, image-based backup?

  • A. Object Recovery
  • B. On-Demand Sandbox
  • C. SureBackup
  • D. Instant VM Recovery


Answer : C

A customer is interested in a Veeam and HPE StoreOnce data protection solution.
What are two reasons a customer would implement a server-side Veeam and HPE Catalyst solution? (Choose two.)

  • A. To allow for direct FC streaming to HPE StoreOnce servers
  • B. To provide data immutability protection to a server’s data
  • C. To use NAS to provide 10-20 times the performance of a traditional backup solution
  • D. To offload deduplication from the workload server to HPE StoreOnce


Answer : AD

A customer is interested in moving the data protection archiving process to a tape solution. The customer stresses that they need long term retention tapes.
If stored properly, what tape life can the customer expect from the HPE tapes used in the HPE StoreEver solution?

  • A. 10 years
  • B. 15 years
  • C. 20 years
  • D. 30 years


Answer : D

A customer recently purchased multiple HPE StoreOnce appliances. They are experiencing slower performance than expected when performing backups to the new solution.
What should the customer do to improve performance?

  • A. Validate that the HPE StoreOnce systems are performing deduplication and compression.
  • B. Schedule VLT, NAS, and Catalyst backups for server workloads at separate times.
  • C. Match the data allocation size for workloads on the server to the data allocation size on HPE StoreOnce.
  • D. Run multiple backups in parallel to improve aggregate throughput to HPE StoreOnce.


Answer : D

A customer currently uses a Veeam-only data protection solution. They want to complement this solution with HPE StoreOnce for disk-based data protection, leveraging server-side deduplication to minimize network bandwidth usage between the servers and the HPE StoreOnce systems.
Which solution meets this customer’s requirements?

  • A. HPE StoreOnce Catalyst OST Plug-in
  • B. HPE StoreOnce Catalyst
  • C. Cloud Bank
  • D. HPE StoreOnce VTL


Answer : A

Which HPE tool would be used to size an HPE Alletra 5000 solution for a customer?

  • A. HPE Ninja Online Block Storage Sizer
  • B. HPE Ninja Online Intelligent Configurator
  • C. HPE NinjaSTARS
  • D. HPE Cloud Physics


Answer : A

When examining the latency analysis information in HPE GreenLake Data Ops Manager, what will help a customer determine what might be causing latency issues?

  • A. Workload drift can be used to determine if a volume is being moved within the datastore, which may cause latency issues for workloads that have volumes in that datastore.
  • B. By default, the latency graph reports average IO latency on the device for 1-day intervals. Changing to a larger interval to helps discover intermittent latency issues.
  • C. Averaging can lead to the loss of outliers, as outliers can have a large impact on the overall average but may not be represented in the average value.
  • D. Using latency hotspots, if datastore outliers are consistently reporting higher latency compared to other objects then bottlenecks could exist.


Answer : D

Page:    1 / 4   
Exam contains 60 questions
Expand All

Talk to us!

Have any questions or issues ? Please dont hesitate to contact us

[email protected]

Certlibrary.com is owned by MBS Tech Limited: Room 1905 Nam Wo Hong Building, 148 Wing Lok Street, Sheung Wan, Hong Kong. Company registration number: 2310926
Certlibrary doesn't offer Real Microsoft Exam Questions. Certlibrary Materials do not contain actual questions and answers from Cisco's Certification Exams.
CFA Institute does not endorse, promote or warrant the accuracy or quality of Certlibrary. CFA® and Chartered Financial Analyst® are registered trademarks owned by CFA Institute.
Terms & Conditions | Privacy Policy | Amazon Exams | Cisco Exams | CompTIA Exams | Databricks Exams | Fortinet Exams | Google Exams | Microsoft Exams | VMware Exams