Certified Wireless Analysis Professional v1.0

Page:    1 / 8   
Exam contains 120 questions

Which one of the following provides the most accurate indication that packets have not been successfully received by the intended recipient?

  • A. CRC errors
  • B. Retries
  • C. Gaps in sequence numbers
  • D. Data packets being sent at low data rates


Answer : C

What is the maximum number of client stations that can receive concurrent OFDMA transmissions from an 802.11ax AP in a 20 MHz channel?

  • A. 9
  • B. 4
  • C. 2
  • D. 1


Answer : A

After investigating the WMM element in a Beacon Frame you notice the TXOP Limit for the Best Effort access category is set to 0. What does this indicate?

  • A. The frame is corrupted
  • B. New associations will be rejected as the access point has no more capacity
  • C. Only one frame can be transmitted in each Best Effort TXOP
  • D. The AP has no associated STAs using the Best Effort Access Category


Answer : C

Which one of the following devices typically has a 100% duty cycle?

  • A. IoT temperature sensor
  • B. Bluetooth mouse
  • C. Analog video camera
  • D. 802.11ac-based AP


Answer : C

ABC corporation has an 802.11n wireless network and advertises 3 SSIDs on all APs: Corporate, Guest, and BYOD. Both the Guest and the BYOD networks broadcast their SSIDs but the corporate SSID is hidden. A client transmits a Wildcard\Any Probe Request frame on channel 36. From the client’s location it can decode beacons frames from two of the organization’s APs operating on channel 36. How many Probe Response frames would you expect this client to decode from ABC corporation’s APs?

  • A. 1
  • B. 2
  • C. 4
  • D. 6


Answer : C

In which field of the MAC header would you find the protected bit and retry bit?

  • A. BSS Control
  • B. Sequence Control
  • C. QoS Control
  • D. Frame Control


Answer : D

Protocol analyzers require the installation of a customized driver to place a USB adapter into which mode that allows capture of all wireless frames on the channel?

  • A. Peek mode
  • B. Sniffer mode
  • C. Monitor mode
  • D. Analyzer mode


Answer : C

When using WMM Power Save (WMM-PS), a client requests buffered data frames by sending which type of frame?

  • A. WMM Poll
  • B. NDP announcement
  • C. Trigger
  • D. More Data


Answer : A

Which value does not change per EDCA Access Category?

  • A. AIFSN
  • B. Slot Time
  • C. CWmin
  • D. CWmax


Answer : B

A STA utilizing DCF for medium access, that has been waiting for the medium to become free, must wait for which interframe space following the ACK of the previous frame transmission?

  • A. DIFS
  • B. AIFS
  • C. EIFS
  • D. PIFS


Answer : A

Which part of a QoS Data frame can be used to advertise its QoS priority?

  • A. QoS Control
  • B. IP header
  • C. WMM Information Element
  • D. 802.1Q VLAN Tag


Answer : A

After a successful 802.11ac network deployment you are performing a packet capture and notice many RTS/CTS frames in your trace file regardless of the AP or BSS. Which of the following is the most likely reason for these RTS/CTS frames?

  • A. There is a hidden node problem.
  • B. This is a denial of service attack.
  • C. Protection mechanisms are enabled.
  • D. The client’s wireless driver needs updating.


Answer : C

Which bit in a neighboring BSS’s Beacon frame will trigger an AP to enable protection mechanism?

  • A. Barker Preamble Mode
  • B. Use Protection
  • C. Non-ERP Present
  • D. Enable Protection


Answer : C

The MAC sublayer references the data unit received from the LLC sublayer as what?

  • A. PSDU
  • B. PPDU
  • C. MSDU
  • D. MPDU


Answer : C

You are using a protocol analyzer to troubleshoot a network and you notice a client frequently sending QoS Null Function frames. What do you conclude?

  • A. This is normal behavior, these frames are part of the sounding exchanging used for Transmit Beamforming and are called PS-Poll frames
  • B. This is normal behavior; these frames are part of the WMM implementation to ensure Quality or Service and are called announcement frames
  • C. This is normal behavior, these frames are used to flip the Power Management bit in the Frame Control field and are called trigger frames
  • D. This is not normal behavior; the client is misbehaving and consuming valuable airtime


Answer : C

Page:    1 / 8   
Exam contains 120 questions

Talk to us!


Have any questions or issues ? Please dont hesitate to contact us

Certlibrary.com is owned by MBS Tech Limited: Room 1905 Nam Wo Hong Building, 148 Wing Lok Street, Sheung Wan, Hong Kong. Company registration number: 2310926
Certlibrary doesn't offer Real Microsoft Exam Questions. Certlibrary Materials do not contain actual questions and answers from Cisco's Certification Exams.
CFA Institute does not endorse, promote or warrant the accuracy or quality of Certlibrary. CFA® and Chartered Financial Analyst® are registered trademarks owned by CFA Institute.
Terms & Conditions | Privacy Policy | Amazon Exams | Cisco Exams | CompTIA Exams | Databricks Exams | Fortinet Exams | Google Exams | Microsoft Exams | VMware Exams