VMware Cloud Foundation Specialist v1.0
Question 1
There has been a service outage that has caused VMware NSX Manager to become unresponsive, and it must be recovered from the last known good backup. The backed up configuration file has been located, and the restore procedure is ready to commence.
Which step should be taken first?
- A. Disconnect VMware NSX Manager from VMware vCenter.
- B. Deploy a new VMware NSX Manager into VMware vCenter.
- C. Migrate the existing VMware NSX Manager.
- D. Restart the existing VMware NSX Manager.
Answer : B
Question 2
An architect is tasked with designing a VMware Cloud Foundation workload domain with multiple tenant clusters. Each tenant cluster is in a dedicated rack. The network design includes a leaf/spine architecture where only one rack is connected to upstream routers. All NSX-T Edge nodes must run in a single vSphere Cluster in the Edge rack.
Refer to the exhibit:
Which design constraint must be considered as part of this design?
- A. A separate NSX-T Manager instance must be deployed for each tenant cluster.
- B. Only eight tenant workload clusters can be deployed.
- C. NSX-T Manager only supports Edge clusters in the management domain.
- D. All clusters in a workload domain must use the same NSX-T Edge cluster.
Answer : D
Question 3
An administrator has been tasked with increasing the available capacity within an existing VMware Cloud Foundation deployment to support the deployment of production workloads.
The VMware Cloud Foundation environment consists of a single workload domain called Production. The existing workload domain consists of a single vSAN Cluster called Production-01. Three new hosts have been commissioned in SDDC Manager for the capacity expansion. The new hosts have identically configured CPU and RAM to the hosts in Production-01. NFS is the required principal storage option.
Which process must the administrator complete to increase the available capacity without the need for additional management components?
- A. Create a new vSphere Cluster within the Production workload domain.
- B. Expand the existing Production-01 cluster by adding the additional hosts.
- C. Create a new network pool in the existing Workload Domain to support vSAN.
- D. Create a new vSphere Cluster within a new workload domain.
Answer : B
Question 4
During initial assessment workshops, a customer expressed that capacity management was one of the major pain points when looking at their geographically spread data centers.
How can VMware Cloud Foundation help to achieve this requirement?
- A. VMware HCX Integration
- B. Joining all sites into a Federation
- C. 3rd party Capacity Management
- D. Creating a SDDC Manager Cluster
Answer : C
Question 5
Which step within the bring-up process is optional when considering the automated deployment of VMware Cloud Foundation?
- A. Downloading the latest Deployment Parameter Workbook or creating JSON
- B. Uploading the completed Deployment Parameter Workbook or JSON
- C. Using the VMware Imaging Appliance (VIA) service to image VMware ESXi Hosts
- D. Deploying the VMware Cloud Builder Appliance
Answer : C
Question 6
Which solution should be considered when designing the management cluster?
- A. VMware Cloud Director
- B. vRealize Suite Lifecycle Manager Cluster
- C. vRealize Suite components
- D. vCenter High Availability
Answer : C
Question 7
The administrator of a new VMware Cloud Foundation instance will deploy the first workload domain. The workload domain will consist of two vSphere clusters using vSAN as principle storage. The organization has a policy that defines the naming of all objects in the SDDC, such as clusters, distributed switches, distributed port groups, and datastores.
The administrator must ensure that all objects in the workload domain conform to the organization's policies.
How can the administrator accomplish this task?
- A. Deploy the workload domain and the second cluster using the SDDC Manager UI, and then use APIs to rename the objects after deployment.
- B. Deploy the workload domain and the second cluster using the SDDC Manager UI, and then input the names for all objects to be created.
- C. Deploy the workload domain and the second cluster using the SDDC Manager UI, and then rename the objects in the vSphere client after deployment.
- D. Deploy the workload domain and the second cluster using the SDDC Manager Developer Center.
Answer : D
Question 8
A new team member has recently joined the backup and recovery team. This team member has been tasked with configuring backups within VMware Cloud Foundation.
Which role should the VMware Cloud Foundation administrator assign this team member?
- A. AUDITOR
- B. ADMIN
- C. ENTERPRISE ADMINISTRATOR
- D. OPERATOR
Answer : C
Question 9
An architect is tasked with designing a VMware Cloud Foundation solution containing two regions. The company wants to make use of existing investments where possible, including re-use of compute, storage, and networking hardware as well as existing implementations of software.
The two sites are well connected with 10Gbps and a round trip latency of 230ms between them. The customer has existing installations of vRealize Operations that they must preserve for historical purposes. Their existing backup solution supports a data retention policy of three years. All data must be encrypted while at rest. They also have a centralized syslog repository that all capable devices must send or forward logs to for deep data analytics.
Which two constraints could impact this design? (Choose two.)
- A. RTT Latency is 230ms between sites.
- B. The Data Retention Policy is too long.
- C. There is an existing vRealize Operations instance.
- D. vMotion must be encrypted.
- E. All syslog events must be sent to a third-party.
Answer : AC
Question 10
An environment requires physical segregation for workload security.
How can VMware Cloud Foundation achieve this requirement?
- A. Isolate vSAN traffic to a separate pair of physical NICs.
- B. Activate Network I/O Control.
- C. Isolate VM traffic to a separate pair of physical NICs.
- D. Activate Guest Introspection.
Answer : C
Question 11
What are two requirements for the automated deployment of the vRealize Suite products using vRealize Suite Lifecycle Manager? (Choose two.)
- A. An IP Pool must be created for each of the solutions.
- B. vRealize Suite Lifecycle Manager must be deployed from SDDC Manager during the bring-up process.
- C. DNS must be reachable.
- D. NTP must be reachable.
- E. A connection to the "My VMware" Account must be set up in vRealize Lifecycle Manager.
Answer : C
Question 12
What is a valid use case for using multiple clusters in a workload domain?
- A. Four new hosts are racked and stacked.
- B. Resource pools are configured for separation of development and production workloads.
- C. Applications and database servers should not run on the same host.
- D. Applications are licensed per physical CPU.
Answer : C
Question 13
Which network type must be added to Network Pools within SDDC Manager to support the deployment of a Workload Domain with VMFS on Fibre Channel storage?
- A. vMotion only
- B. vSAN and NFS only
- C. vMotion, NFS, and vSAN
- D. vSAN and vMotion only
Answer : C
Question 14
Which tool should be used to plan the size of a workload domain?
- A. VMware vRealize Log Insight
- B. VMware Capacity Planner
- C. Planning and Preparation Workbook
- D. VMware StorageHub
Answer : B
Question 15
Which MTU range should be entered when a network pool is created?
- A. 1496 and 4096
- B. 1500 and 9000
- C. 1 and 4096
- D. 1480 and 9000
Answer : B