Advanced Design VMware NSX-T Data Center v1.0

Page:    1 / 4   
Exam contains 61 questions

A Solution Architect will be deploying an Ethernet Virtual Private Network (EVPN) in their NSX-T Data Center environment.
What two selections must be prepared for the EVPN deployment? (Choose two.)

  • A. deployed Tier-0 gateway
  • B. deployed Load Balancer
  • C. deployed Tier-1 gateway
  • D. remote gateway with support for IGP and VLAN priority
  • E. remote gateway with support for MP-BGP and VXLAN


Answer : BE

Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

Which three choices are part of a Design Approach when discussing design alternatives and their effects? (Choose three.)

  • A. backup
  • B. budget
  • C. cost
  • D. performance
  • E. knowledge
  • F. security


Answer : DEF

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the assessment:
There must be a performance based SLA for East "" West traffic.


Which two key performance features should the architect recommend? (Choose two.)

  • A. Configure N-VDS enhanced Data Path
  • B. Install advanced Edge pNIC Features
  • C. Setup RSS to leverage multiple cores
  • D. Leverage DPDK drivers
  • E. Enable GENEVE Offload


Answer : CE

Which two VMware recommendations should an architect follow when configuring top of rack (ToR) switches in an NSX-T Data Center environment? (Choose two.)

  • A. Use only IPv4 addressing in all deployments.
  • B. Configure redundant physical switches to enhance availability.
  • C. Configure switch ports that connect to ESXi host manually as trunk ports.
  • D. Configure switch ports with a Dynamic Trunking Protocol.
  • E. Modify the Spanning Tree Protocol to increase the time to transition to the forwarding state.


Answer : DE

Reference:
https://docs.vmware.com/en/VMware-Validated-Design/5.0.1/vmware-validated-design-501-sddc-nsxt-workload-architecture-design.pdf
(18)

A Solutions Architect is working with a customer which wants to extend their traditional Telco IP/MPLS core network to an NFV cloud.
Which NSX-T Data Center feature can be recommended by the architect? (Choose the best answer.)

  • A. Distributed IDS
  • B. EVPN
  • C. Load Balancer
  • D. BGP


Answer : D

Reference:
https://docs.vmware.com/en/VMware-vCloud-NFV/3.0/vmware-vcloud-nfv-30.pdf

An NSX-T architect is working with a customer who wants to improve performance and future-proof their workloads with a multi-site architecture.
A current-state analysis captured this information:
✑ Latency between sites is 160ms.
✑ Bandwidth is 2Gbps.
✑ The MTU is 1600.
What two VMware design recommendations should the architect recommend to the organization to achieve future-proofing? (Choose two.)

  • A. MTU is recommended to be 9000.
  • B. MTU must be at least 1700.
  • C. Bandwidth must be at least 10Gbps.
  • D. Latency RTT is acceptable.
  • E. Latency must be less than 150ms.


Answer : AE

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
✑ There are applications which use IPv6 addressing.
✑ Network administrators are not familiar with NSX-T Data Center solutions.
✑ Hosts can only be configured with two physical NICs.
✑ There is an existing management cluster to deploy the NSX-T components.
✑ Dynamic routing should be configured between the physical and virtual network.
✑ There is a storage array available to deploy NSX-T components.
Which two requirements were documented by the architect? (Choose two.)

  • A. There are applications which use IPv6 addressing.
  • B. Dynamic routing should be configured between the physical and virtual network.
  • C. Hosts can only be configured with two physical NICs.
  • D. The storage array has enough capacity to deploy NSX components.
  • E. Network administrators are not familiar with NSX-T Data Center solutions.


Answer : BD

An NSX-T Architect is working in a brownfield environment with 4 ESXi hosts. These constraints were documented:
✑ new servers cannot be purchased
✑ North/South bandwidth must be guaranteed
✑ Top-of-Rack switches have additional uplinks
Which three recommendations should the architect implement? (Choose three.)

  • A. Remove one of the ESXi hosts and install a bare-metal Edge.
  • B. Use a resource pool for production workloads.
  • C. Use a resource pool to deploy the Edge nodes on.
  • D. Recommend obtaining 2 new physical NICs for the servers.
  • E. Install Edge nodes on a separate cluster.


Answer : ACD

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
✑ There is a critical application used by the Finance Team.
✑ The critical application has an availability and recoverability SLA of 99.999%.
✑ The critical application is sensitive to network changes.
Which two selections should an architect include in their design? (Choose two.)

  • A. Configure Tier-0 gateway for eBGP and ECMP.
  • B. Configure Tier-1 gateway for eBGP and ECMP.
  • C. Enable BFD on Tier-0 gateway.
  • D. Install and configure hosts with 100Gbps physical NICs.
  • E. Configure multiple static routes on Tier-1 gateway.


Answer : BD

Which two protocols are typically used for multicast in a NSX-T Data Center environment? (Choose two.)

  • A. PIM Full Form
  • B. PIM Dense Mode
  • C. IGMPv2
  • D. PIM Sparse mode
  • E. IGMPv3


Answer : CD

Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-6AAC3360-4F79-4FBF-BCC1-0D8C220B0621.html

Which type of design includes vendor models, host names, IP Addresses, port connections, logical unit number sizes, and number of CPUs? (Choose the best answer.)

  • A. Physical Design
  • B. Conceptual Design
  • C. High-Level Design
  • D. Logical Design


Answer : A

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
Which two statements should the architect consider as non-technical requirements? (Choose two.)

  • A. Any solution should add more value to current and future customers engagements.
  • B. The design should offer agility and freedom for application phases.
  • C. All application servers have hardcoded IP addresses.
  • D. Current business continuity and disaster recovery plans are based on tape technology.
  • E. Different vendors are used for the storage solution.


Answer : BD

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
During discussions about centralized services NAT running on Tier-1 or Tier-0 Gateway, the customer made these requests:
✑ Services contain stateful services.
✑ Services should be in high availability mode.
Which two selections should the architect include in their design? (Choose two.)

  • A. An active/active model should be used.
  • B. Use Reflexive NAT on the uplink interface.
  • C. DNAT should be applied on the uplink interface.
  • D. Mix stateful and stateless NAT rules on the same gateway.
  • E. The high availability mode supported is only Active-Standby.


Answer : DE

What is a design justification for a solution with 3 NSX Manager nodes deployed in a 4 ESXi cluster Management Cluster? (Choose the best answer.)

  • A. NSX Controllers are separated from NSX Managers allowing 6 ESXi servers to host them.
  • B. NSX Management Plane and Control Plane will be reduced to a single point of failure.
  • C. Compute consumption guarantees NSX Manager nodes can be run on the same ESXi host.
  • D. Single point of failure on Control Plane and Management Plane will be mitigated.


Answer : B

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
Which three selections are requirements documented by an architect? (Choose three.)

  • A. Aggregate N-S throughput at any given time should be at least 10G.
  • B. All traffic should recover in the event of Host/Rack/ToR failure.
  • C. Hardware is 5 years old and new hardware is already purchased.
  • D. SAN storage has enough capacity to build the new infrastructure.
  • E. Business critical applications should have an SLA of 99.99%.
  • F. The Development Team are heavy on API usage.


Answer : ACF

Page:    1 / 4   
Exam contains 61 questions

Talk to us!


Have any questions or issues ? Please dont hesitate to contact us

Certlibrary.com is owned by MBS Tech Limited: Room 1905 Nam Wo Hong Building, 148 Wing Lok Street, Sheung Wan, Hong Kong. Company registration number: 2310926
Certlibrary doesn't offer Real Microsoft Exam Questions. Certlibrary Materials do not contain actual questions and answers from Cisco's Certification Exams.
CFA Institute does not endorse, promote or warrant the accuracy or quality of Certlibrary. CFA® and Chartered Financial Analyst® are registered trademarks owned by CFA Institute.
Terms & Conditions | Privacy Policy