Certified Network Defender v1.0

Page:    1 / 42   
Exam contains 617 questions

Which of the following devices allows wireless communication devices to connect to a wireless network using Wi-Fi, Bluetooth, or related standards?

  • A. Express card
  • B. WAP
  • C. WNIC
  • D. Wireless repeater
  • E. None


Answer : B

A wireless access point (WAP) is a device that allows wireless communication devices to connect to a wireless network using Wi-Fi, Bluetooth, or related standards. The WAP usually connects to a wired network, and it can transmit data between wireless devices and wired devices on the network. Each access point can serve multiple users within a defined network area. As people move beyond the range of one access point, they are automatically handed over to the next one. A small WLAN requires a single access point. The number of access points in a network depends on the number of network users and the physical size of the network.
Answer option C is incorrect. A wireless network interface card (WNIC) is a network card that connects to a radio-based computer network, unlike a regular network interface controller (NIC) that connects to a wire-based network such as token ring or ethernet. A WNIC, just like a NIC, works on the Layer 1 and Layer 2 of the OSI Model. A WNIC is an essential component for wireless desktop computer. This card uses an antenna to communicate through microwaves. A WNIC in a desktop computer is usually connected using the PCI bus.
Answer option A is incorrect. ExpressCard, a new standard introduced by PCMCIA, is a thinner, faster, and lighter modular expansion for desktops and laptops.
Users can add memory, wired or wireless communication cards, and security devices by inserting these modules into their computers. ExpressCard slots are designed to accommodate modules that use either Universal Serial Bus (USB) 2.0 or the PCI Express standard. ExpressCard modules are available in two sizes, i.e., 34 mm wide (ExpressCard/34) and 54 mm wide (ExpressCard/54). Both modules are 75 mm long and 5 mm high. An ExpressCard/34 module can be inserted in either a 54 mm slot or a 34 mm slot, but an ExpressCard/54 requires a Universal (54 mm) slot. However, an extender can be used with ExpressCard/34 slot to connect the ExpressCard/54 module from outside of the computer. Both the modules are identical in performance. They take full advantage of the features of the
PCI Express or USB 2.0 interfaces. The only difference between them is that the ExpressCard/54 form-factor, due to its larger surface area, allows for greater thermal dissipation than does an ExpressCard/34. As the performance does not vary with module size, module developers usually prefer to fit their applications into the smaller ExpressCard/34 form factor. But some applications, such as SmartCard readers, and CompactFlash readers, require the extra width of an
ExpressCard/54 module.
Answer option D is incorrect. A wireless repeater is a networking device that works as a repeater between a wireless router and computers. It is used to connect a client to the network when the client is out of the service area of the access point. If the wireless repeater is configured properly, it extends the range of the wireless LAN network.

Which of the following protocols uses a control channel over TCP and a GRE tunnel operating to encapsulate PPP packets?

  • A. PPTP
  • B. ESP
  • C. LWAPP
  • D. SSTP


Answer : A

The Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks. PPTP uses a control channel over TCP and a GRE tunnel operating to encapsulate PPP packets. The PPTP specification does not describe encryption or authentication features and relies on the PPP protocol being tunneled to implement security functionality. However, the most common PPTP implementation, shipping with the Microsoft Windows product families, implements various levels of authentication and encryption natively as standard features of the Windows PPTP stack. The intended use of this protocol is to provide similar levels of security and remote access as typical VPN products.
Answer option B is incorrect. Encapsulating Security Payload (ESP) is an IPSec protocol that provides confidentiality, in addition to authentication, integrity, and anti-replay. ESP can be used alone or in combination with Authentication Header (AH). It can also be nested with the Layer Two Tunneling Protocol (L2TP). ESP does not sign the entire packet unless it is being tunneled. Usually, only the data payload is protected, not the IP header.
Answer option D is incorrect. Secure Socket Tunneling Protocol (SSTP) is a form of VPN tunnel that provides a mechanism to transport PPP or L2TP traffic through an SSL 3.0 channel. SSL provides transport-level security with key-negotiation, encryption, and traffic integrity checking. The use of SSL over TCP port
443 allows SSTP to pass through virtually all firewalls and proxy servers. SSTP servers must be authenticated during the SSL phase. SSTP clients can optionally be authenticated during the SSL phase, and must be authenticated in the PPP phase. The use of PPP allows support for common authentication methods, such as EAP-TLS and MS-CHAP. SSTP is available in Windows Server 2008, Windows Vista SP1, and later operating systems. It is fully integrated with the RRAS architecture in these operating systems, allowing its use with Winlogon or smart card authentication, remote access policies, and the Windows VPN client.
Answer option C is incorrect. LWAPP (Lightweight Access Point Protocol) is a protocol used to control multiple Wi-Fi wireless access points at once. This can reduce the amount of time spent on configuring, monitoring, or troubleshooting a large network. This also allows network administrators to closely analyze the network.

Which of the following procedures is designed to enable security personnel to identify, mitigate, and recover from malicious computer incidents, such as unauthorized access to a system or data, denial-of-service, or unauthorized changes to system hardware, software, or data?

  • A. Cyber Incident Response Plan
  • B. Crisis Communication Plan
  • C. Disaster Recovery Plan
  • D. Occupant Emergency Plan


Answer : A

The Cyber Incident Response Plan is used to address cyber attacks against an organization's IT system through various procedures. These procedures enable security personnel to identify, mitigate, and recover from malicious computer incidents, such as denial-of-service attacks, unauthorized accessing of a system or data, or unauthorized changes to system hardware, software, or data.
Answer option C is incorrect. A disaster recovery plan should contain data, hardware, and software that can be critical for a business. It should also include the plan for sudden loss such as hard disc crash. The business should use backup and data recovery utilities to limit the loss of data.
Answer option D is incorrect. The Occupant Emergency Plan (OEP) is used to reduce the risk to personnel, property, and other assets while minimizing work disorders in the event of an emergency. It is the response procedure for occupants of a facility on the occurrence of a situation, which is posing a potential threat to the health and safety of personnel, the environment, or property. OEPs are developed at the facility level, specific to the geographic site and structural design of the building.
Answer option B is incorrect. The crisis communication plan can be broadly defined as the plan for the exchange of information before, during, or after a crisis event. It is considered as a sub-specialty of the public relations profession that is designed to protect and defend an individual, company, or organization facing a public challenge to its reputation. The aim of crisis communication plan is to assist organizations to achieve continuity of critical business processes and information flows under crisis, disaster or event driven circumstances.

Which of the following TCP commands are used to allocate a receiving buffer associated with the specified connection?

  • A. Send
  • B. Close
  • C. None
  • D. Receive
  • E. Interrupt


Answer : D

The Receive command is used to allocate a receiving buffer associated with the specified connection. An error is returned if no OPEN precedes this command or the calling process is not authorized to use this connection.
Answer option A is incorrect. The Send command causes the data contained in the indicated user buffer to be sent to the indicated connection.
Answer option C is incorrect. The Abort command causes all pending SENDs and RECEIVES to be aborted.
Answer option B is incorrect. The Close command causes the connection specified to be closed.

You work as a professional Computer Hacking Forensic Investigator for DataEnet Inc. You want to investigate e-mail information of an employee of the company.
The suspected employee is using an online e-mail system such as Hotmail or Yahoo. Which of the following folders on the local computer will you review to accomplish the task? Each correct answer represents a complete solution. Choose all that apply.

  • A. History folder
  • B. Temporary Internet Folder
  • C. Cookies folder
  • D. Download folder


Answer : CAB

Online e-mail systems such as Hotmail and Yahoo leave files containing e-mail message information on the local computer. These files are stored in a number of folders, which are as follows:

Cookies folder -

Temp folder -

History folder -

Cache folder -
Temporary Internet Folder Forensic tools can recover these folders for the respective e-mail clients. When folders are retrieved, e-mail files can be accessed. If the data is not readable, various tools are available to decrypt the information such as a cookie reader used with cookies.
Answer option D is incorrect. Download folder does not contain any e-mail message information.

Which of the following layers of the TCP/IP model maintains data integrity by ensuring that messages are delivered in the order in which they are sent and that there is no loss or duplication?

  • A. Transport layer
  • B. Link layer
  • C. Internet layer
  • D. Application layer


Answer : A

The transport layer ensures that messages are delivered in the order in which they are sent and that there is no loss or duplication. Transport layer maintains data integrity.
Answer option C is incorrect. The Internet Layer of the TCP/IP model solves the problem of sending packets across one or more networks. Internetworking requires sending data from the source network to the destination network. This process is called routing. IP can carry data for a number of different upper layer protocols.
Answer option B is incorrect. The Link Layer of TCP/IP model is the networking scope of the local network connection to which a host is attached. This is the lowest component layer of the Internet protocols, as TCP/IP is designed to be hardware independent. As a result, TCP/IP has been implemented on top of virtually any hardware networking technology in existence. The Link Layer is used to move packets between the Internet Layer interfaces of two different hosts on the same link. The processes of transmitting and receiving packets on a given link can be controlled both in the software device driver for the network card, as well as on firmware or specialized chipsets.
Answer option D is incorrect. The Application Layer of TCP/IP model refers to the higher-level protocols used by most applications for network communication.
Examples of application layer protocols include the File Transfer Protocol (FTP) and the Simple Mail Transfer Protocol (SMTP). Data coded according to application layer protocols are then encapsulated into one or more transport layer protocols, which in turn use lower layer protocols to affect actual data transfer.

Which of the following is a telecommunication service designed for cost-efficient data transmission for intermittent traffic between local area networks (LANs) and between end-points in a wide area network (WAN)?

  • A. PPP
  • B. Frame relay
  • C. ISDN
  • D. X.25
  • E. None


Answer : B

Frame relay is a telecommunication service designed for cost-efficient data transmission for intermittent traffic between local area networks (LANs) and between end-points in a wide area network (WAN). Frame relay puts data in a variable-size unit called a frame. It checks for lesser errors as compared to other traditional forms of packet switching and hence speeds up data transmission. When an error is detected in a frame, it is simply dropped. The end points are responsible for detecting and retransmitting dropped frames.
Answer option C is incorrect. Integrated Services Digital Network (ISDN) is a digital telephone/telecommunication network that carries voice, data, and video over an existing telephone network infrastructure. It requires an ISDN modem at both the ends of a transmission. ISDN is designed to provide a single interface for hooking up a telephone, fax machine, computer, etc. ISDN has two levels of service, i.e., Basic Rate Interface (BRI) and Primary Rate Interface (PRI).
Answer option A is incorrect. The Point-to-Point Protocol, or PPP, is a data link protocol commonly used to establish a direct connection between two networking nodes. It can provide connection authentication, transmission encryption privacy, and compression. PPP is commonly used as a data link layer protocol for connection over synchronous and asynchronous circuits, where it has largely superseded the older, non-standard Serial Line Internet Protocol (SLIP) and telephone company mandated standards (such as Link Access Protocol, Balanced (LAPB) in the X.25 protocol suite). PPP was designed to work with numerous network layer protocols, including Internet Protocol (IP), Novell's Internetwork Packet Exchange (IPX), NBF, and AppleTalk.
Answer option D is incorrect. The X.25 protocol, adopted as a standard by the Consultative Committee for International Telegraph and Telephone (CCITT), is a commonly-used network protocol. The X.25 protocol allows computers on different public networks (such as CompuServe, Tymnet, or a TCP/IP network) to communicate through an intermediary computer at the network layer level. X.25's protocols correspond closely to the data-link and physical-layer protocols defined in the Open Systems Interconnection (OSI) communication model.

Which of the following policies is a set of rules designed to enhance computer security by encouraging users to employ strong passwords and use them properly?

  • A. Information protection policy
  • B. Remote access policy
  • C. Group policy
  • D. Password policy


Answer : D

A password policy is a set of rules designed to enhance computer security by encouraging users to employ strong passwords and use them properly. Password policies are account policies that are related to the users' accounts. Such policies are password-related settings that provide different constraints for the password's usage. Password policies can be configured to enforce users to provide passwords only in a specific way when they try to log on to their computers.
These policies increase the effectiveness of the user's computers. Answer option C is incorrect. A group policy specifies how programs, network resources, and the operating system work for users and computers in an organization.
Answer option A is incorrect. An information protection policy ensures that information is appropriately protected from modification or disclosure.
Answer option B is incorrect. Remote access policy is a document that outlines and defines acceptable methods of remotely connecting to the internal network.

Which of the following biometric devices is used to take impressions of the friction ridges of the skin on the underside of the tip of the fingers?

  • A. Facial recognition device
  • B. Iris camera
  • C. Voice recognition voiceprint
  • D. Fingerprint reader


Answer : D

A fingerprint reader is used to take impressions of the friction ridges of the skin on the underside of the tip of the fingers. Fingerprints help in identifying users and are unique and different to everyone and do not change over time. Even identical twins who share their DNA do not have the same fingerprints. Police and
Government agencies have used these modes in order to identify humans for many years, but other agencies are starting to use biometric fingerprint readers for identification in many different applications. A fingerprint is created when the friction ridges of the skin come in contact with a surface that is receptive to a print by means of an agent to form the print like perspiration, oil, ink, grease, and many more. The agent is then transferred to the surface and leaves an impression which creates the fingerprint.
Answer option B is incorrect. An iris camera is used to perform recognition detection of a user's identity by mathematical analysis of the random patterns that are visible within the iris of an eye from some distance. It is used to combine computer vision, pattern recognition, statistical inference, and optics.
Answer option A is incorrect. A facial recognition device helps in viewing an image or video of a person and compares it to one that is in the database. It performs facial recognition by comparing the following: Structure, shape, and proportions of the face Distance between the eyes, nose, mouth, and jaw Upper outlines of the eye sockets The sides of the mouth Location of the nose and eyes The area surrounding the check bones. Answer option C is incorrect. A voice recognition voiceprint is a spectrogram, which is a graph that shows a sound's frequency on the vertical axis and time on the horizontal axis. Different speech sounds help in creating different shapes on the graph. Spectrograms also use color or shades of gray to represent the acoustical qualities of sound.

Peter, a malicious hacker, obtains e-mail addresses by harvesting them from postings, blogs, DNS listings, and Web pages. He then sends a large number of unsolicited commercial e-mail (UCE) messages to these addresses. Which of the following e-mail crimes is Peter committing?

  • A. E-mail spam
  • B. E-mail storm
  • C. E-mail bombing
  • D. E-mail spoofing


Answer : A

Peter is performing spamming activity. Spam is a term that refers to the unsolicited e-mails sent to a large number of e-mail users. The number of such e-mails is increasing day by day, as most companies now prefer to use e-mails for promoting their products. Because of these unsolicited e-mails, legitimate e-mails take a much longer time to deliver to their destination. The attachments sent through spam may also contain viruses. However, spam can be stopped by implementing spam filters on servers and e-mail clients.
Answer option C is incorrect. Mail bombing is an attack that is used to overwhelm mail servers and clients by sending a large number of unwanted e-mails. The aim of this type of attack is to completely fill the recipient's hard disk with immense, useless files, causing at best irritation, and at worst total computer failure. E- mail filtering and properly configuring email relay functionality on mail servers can be helpful for protection against this type of attack.
Answer option B is incorrect. An e-mail storm is a sudden spike of Reply All messages on an e-mail distribution list, usually caused by a controversial or misdirected message. Such storms start when multiple members of the distribution list reply to the entire list at the same time in response to an instigating message. Other members soon respond, usually adding vitriol to the discussion, asking to be removed from the list, or pleading for the cessation of messages. If enough members reply to these unwanted messages, this triggers a chain reaction of e-mail messages. The sheer load of traffic generated by these storms can render the e-mail servers carrying them inoperative, similar to a DDoS attack. Some e-mail viruses also have the capacity to create e-mail storms, by sending copies of themselves to an infected user's contacts, including distribution lists, infecting the contacts in turn.
Answer option D is incorrect. E-mail spoofing is a term used to describe e-mail activity in which the sender address and other parts of the e-mail header are altered to appear as though the e-mail originated from a different source. E-mail spoofing is a technique commonly used for spam e-mail and phishing to hide the origin of an e-mail message. By changing certain properties of the e-mail, such as the From, Return-Path, and Reply-To fields (which can be found in the message header), ill-intentioned users can make the e-mail appear to be from someone other than the actual sender. The result is that, although the e-mail appears to come from the address indicated in the From field, it actually comes from another source.

Which of the following refers to the exploitation of a valid computer session to gain unauthorized access to information or services in a computer system?

  • A. Spoofing
  • B. Smurf
  • C. Session hijacking
  • D. Phishing


Answer : C

Session hijacking refers to the exploitation of a valid computer session to gain unauthorized access to information or services in a computer system. In particular, it is used to refer to the theft of a magic cookie used to authenticate a user to a remote server. It has particular relevance to Web developers, as the HTTP cookies used to maintain a session on many Web sites can be easily stolen by an attacker using an intermediary computer or with access to the saved cookies on the victim's computer (see HTTP cookie theft). TCP session hijacking is when a hacker takes over a TCP session between two machines. Since most authentication only occurs at the start of a TCP session, this allows the hacker to gain access to a machine.
Answer option A is incorrect. Spoofing is a technique that makes a transmission appear to have come from an authentic source by forging the IP address, email address, caller ID, etc. In IP spoofing, a hacker modifies packet headers by using someone else's IP address to hide his identity. However, spoofing cannot be used while surfing the Internet, chatting on-line, etc. because forging the source IP address causes the responses to be misdirected.
Answer option B is incorrect. Smurf is an attack that generates significant computer network traffic on a victim network. This is a type of denial-of-service attack that floods a target system via spoofed broadcast ping messages. In such attacks, a perpetrator sends a large amount of ICMP echo request (ping) traffic to IP broadcast addresses, all of which have a spoofed source IP address of the intended victim. If the routing device delivering traffic to those broadcast addresses delivers the IP broadcast to all hosts, most hosts on that IP network will take the ICMP echo request and reply to it with an echo reply, which multiplies the traffic by the number of hosts responding.
Answer option D is incorrect. Phishing is a type of scam that entices a user to disclose personal information such as social security number, bank account details, or credit card number. An example of phishing attack is a fraudulent e-mail that appears to come from a user's bank asking to change his online banking password. When the user clicks the link available on the e-mail, it directs him to a phishing site which replicates the original bank site. The phishing site lures the user to provide his personal information.

DRAG DROP -
George works as a Network Administrator for Blue Soft Inc. The company uses Windows Vista operating system. The network of the company is continuously connected to the Internet. What will George use to protect the network of the company from intrusion?
Select and Place:



Answer :

A firewall is a set of related programs configured to protect private networks connected to the Internet from intrusion. It is used to regulate the network traffic between different computer networks. It permits or denies the transmission of a network packet to its destination based on a set of rules. A firewall is often installed on a separate computer so that an incoming packet does not get into the network directly.

Which of the following are the common security problems involved in communications and email? Each correct answer represents a complete solution. Choose all that apply.

  • A. Message replay
  • B. Identity theft
  • C. Message modification
  • D. Message digest
  • E. Message repudiation
  • F. Eavesdropping
  • G. False message


Answer : FBCGAE

Following are the common security problems involved in communications and email:
Eavesdropping: It is the act of secretly listening to private information through telephone lines, e-mail, instant messaging, and any other method of communication considered private.
Identity theft: It is the act of obtaining someone's username and password to access his/her email servers for reading email and sending false email messages.
These credentials can be obtained by eavesdropping on SMTP, POP, IMAP, or Webmail connections.
Message modification: The person who has system administrator permission on any of the SMTP servers can visit anyone's message and can delete or change the message before it continues on to its destination. The recipient has no way of telling that the email message has been altered.
False message: It the act of constructing messages that appear to be sent by someone else.
Message replay: In a message replay, messages are modified, saved, and re-sent later.
Message repudiation: In message repudiation, normal email messages can be forged. There is no way for the receiver to prove that someone had sent him/her a particular message. This means that even if someone has sent a message, he/she can successfully deny it.
Answer option D is incorrect. A message digest is a number that is created algorithmically from a file and represents that file uniquely.

Which of the following layers of TCP/IP model is used to move packets between the Internet Layer interfaces of two different hosts on the same link?

  • A. Application layer
  • B. Internet layer
  • C. Link layer
  • D. Transport Layer
  • E. None


Answer : C

The Link Layer of TCP/IP model is the networking scope of the local network connection to which a host is attached. This is the lowest component layer of the
Internet protocols, as TCP/IP is designed to be hardware independent. As a result, TCP/IP has been implemented on top of virtually any hardware networking technology in existence. The Link Layer is used to move packets between the Internet Layer interfaces of two different hosts on the same link. The processes of transmitting and receiving packets on a given link can be controlled both in the software device driver for the network card, as well as on firmware or specialized chipsets.
Answer option B is incorrect. The Internet Layer of the TCP/IP model solves the problem of sending packets across one or more networks. Internetworking requires sending data from the source network to the destination network. This process is called routing. IP can carry data for a number of different upper layer protocols.
Answer option D is incorrect. The Transport Layer of TCP/IP model is responsible for end-to-end message transfer capabilities independent of the underlying network, along with error control, segmentation, flow control, congestion control, and application addressing (port numbers). End to end message transmission or connecting applications at the transport layer can be categorized as either connection-oriented, implemented in Transmission Control Protocol (TCP), or connectionless, implemented in User Datagram Protocol (UDP).
Answer option is incorrect. The Application Layer of TCP/IP model refers to the higher-level protocols used by most applications for network communication.
Examples of application layer protocols include the File Transfer Protocol (FTP) and the Simple Mail Transfer Protocol (SMTP). Data coded according to application layer protocols are then encapsulated into one or more transport layer protocols, which in turn use lower layer protocols to affect actual data transfer.

FILL BLANK -
Fill in the blank with the appropriate term. ________________ is the process, policies, and procedures related to preparing for recovery or continuation of technology infrastructure critical to an organization after a natural or human-induced disaster.



Answer : Disaster recovery

Disaster recovery is the process, policies, and procedures related to preparing for recovery or continuation of technology infrastructure critical to an organization after a natural or human-induced disaster. Disaster recovery planning is a subset of a larger process known as business continuity planning and should include planning for resumption of applications, data, hardware, communications (such as networking) and other IT infrastructure. A business continuity plan (BCP) includes planning for non-IT related aspects such as key personnel, facilities, crisis communication and reputation protection, and should refer to the disaster recovery plan (DRP) for IT related infrastructure recovery / continuity.

Page:    1 / 42   
Exam contains 617 questions

Talk to us!


Have any questions or issues ? Please dont hesitate to contact us

Certlibrary.com is owned by MBS Tech Limited: Room 1905 Nam Wo Hong Building, 148 Wing Lok Street, Sheung Wan, Hong Kong. Company registration number: 2310926
Certlibrary doesn't offer Real Microsoft Exam Questions. Certlibrary Materials do not contain actual questions and answers from Cisco's Certification Exams.
CFA Institute does not endorse, promote or warrant the accuracy or quality of Certlibrary. CFA® and Chartered Financial Analyst® are registered trademarks owned by CFA Institute.
Terms & Conditions | Privacy Policy