vSphere 6 Foundations Exam v10.0

Page:    1 / 15   
Exam contains 215 questions

Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?

  • A. Route based on physical NIC workload
  • B. Route based on IP Hash
  • C. Route based on the originating virtual port
  • D. Route based on Source MAC Hash


Answer : A

You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network.

Which action would you take to accomplish this task?

  • A. Enable IP pools.
  • B. Configure a local DHCP server in the vApp.
  • C. Enable NAT on the vApp router.
  • D. Configure the guest OS for workgroup and WINS.


Answer : A

An administrator is working to update the hosts and virtual machines in a vSphere 5.x deployment using Update Manager Baselines.
Other than host patches, which three items require a separate procedure or process to update? (Choose three.)

  • A. Operating system patches
  • B. Virtual Appliance updates
  • C. Virtual Machine Virtual Hardware upgrades
  • D. VMware Tools on machines without VMware Tools already installed
  • E. Application patches within the virtual machine


Answer : A,D,E

Explanation:
Operating system patches are related to operating system so they need a separate procedure altogether. Same is the case with VMware tools and applications patches because applications are stand alone pieces of code that need separate procedure to apply a patch.

What information is required as part of an interactive ESXi 6.x installation?

  • A. Keyboard layout
  • B. IP Address
  • C. Root password
  • D. DNS information


Answer : A

Which two storage controller configurations can be used with Virtual SAN? (Choose two.)

  • A. SAS controllers in Passthrough mode
  • B. SAS controllers in RAID0 mode
  • C. SAS controllers in RAID1 mode
  • D. SAS controllers in RAID10 mode


Answer : A,B

By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?

  • A. RedHat Certificate Authority
  • B. VMware Certificate Authority
  • C. DigiCert Certificate Authority
  • D. Verisign Certificate Authority


Answer : B

Which three items should be validated prior to installing ESXi 6.x? (Choose three.)

  • A. Remote Storage has been disconnected.
  • B. Installation media is available.
  • C. Server hardware clock is set to UTC.
  • D. Storage has been partitioned with a VMFS volume.
  • E. Network cards have been setup to use Jumbo Frames.


Answer : A,B,C

When attempting to power on a Virtual Machine you observe the following error:

Cannot open the disk '/vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it depends on.

Which three actions will be the best solutions to address this problem? (Choose three.)

  • A. Verify that the virtual machine's disk files are present.
  • B. Investigate the host and virtual machine log files.
  • C. Verify the vmdk descriptor files and if required, recreate them.
  • D. Delete the disk file preventing the power on operation.
  • E. Migrate or register the virtual machine to a different host.


Answer : A,B,C

An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails.
What are two reasons that the host failed to enter maintenance mode? (Choose two.)

  • A. The DRS cluster Automation Level is set to Partially Automated mode.
  • B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group.
  • C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group.
  • D. One of the virtual machines on the ESXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated.


Answer : A,D

An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions:
-> High virtual CPU
-> High active memory consumption.
The alarm is only triggering when both of the conditions are met.

What can be done to correct the alarm behavior?

  • A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
  • B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
  • C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
  • D. Delete the existing alarm and create a new event based alarm.


Answer : A

An administrator is performing upgrades to ESXi 6.x from ESX 3.x and ESX 4.x hosts.
What is true about this procedure?

  • A. A direct, in-place upgrade can be performed only on ESX 4.1 and later hosts.
  • B. ESX 3.x hosts can be upgraded, but require an upgrade to 4.x before 5.x.
  • C. A direct, in-place upgrade can be performed only on ESX 4.5 and later hosts.
  • D. A direct, in-place upgrade can be performed only on ESX 3.5 and later hosts.


Answer : B

Explanation:
You must upgrade version 3.x ESX and ESXi hosts to ESX or ESXi version 4.x before you can upgrade them to ESXi 5.1.x. See the vSphere 4.x upgrade documentation.
Alternatively, you might find it simpler and more cost effective to do a fresh installation of
ESXi 5.1.x.

A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x.
What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?

  • A. The virtual machine was built with the default hardware version.
  • B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
  • C. A DRS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
  • D. The VMDK file is locked.


Answer : A

Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)

  • A. A value in the Virtual Flash Read Cache text box must be entered.
  • B. A Flash Resource Pool for Cache size reservation must be entered.
  • C. The Device backing and the block size must be configured.
  • D. The Enable virtual flash host swap cache check box must be selected.


Answer : A,D

A company has decided to implement Virtual SAN within their vSphere 6.x environment.
The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual
SAN Ready Node list.
Each ESXi host includes:
-> Two SAS Controllers that support Passthrough Mode
-> Four Solid State Drives (SSDs) 1TB in size each
-> 20 SAS Magnetic Disks (MDs) 1TB in size each
-> The SSDs and MDs are evenly split between the two SAS controllers
The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode.

Which two Disk Group configurations would meet the stated configuration requirements?
(Choose two.)

  • A. 4 disk groups with 1 SSD and 5 MDs each
  • B. 2 disk groups with 1 SSD and 7 MDs each
  • C. 2 disk groups with 2 SSDs and 7 MDs each
  • D. 2 disk groups with 1 SSD and 10 MDs each


Answer : A,B

An administrator is only able to see the Health Badge when using the vRealize Operations user interface.
What is the likely cause of this behavior?

  • A. The vRealize Operations Foundation License is in use.
  • B. The vmware-sps service failed to start.
  • C. The vRealize Operations Standard License is in use.
  • D. The vmware-rbd-watchdog service failed to start.


Answer : A

Page:    1 / 15   
Exam contains 215 questions

Talk to us!


Have any questions or issues ? Please dont hesitate to contact us

Certlibrary doesn't offer Real Microsoft Exam Questions.
Certlibrary Materials do not contain actual questions and answers from Cisco's Certification Exams.
CFA Institute does not endorse, promote or warrant the accuracy or quality of Certlibrary. CFA® and Chartered Financial Analyst® are registered trademarks owned by CFA Institute.